![background image](http://html1.mh-extra.com/html/dish-network/basic-remote/basic-remote_user-manual_2509166013.webp)
5
3
For
AUX
mode only
. Press
0 for a second TV, or 1 for a
second VCR, or 2 for a
tuner, or amplifier. Then
press the
STAR
(*) button.
This step is for programming
which kind of equipment that
should be programmed in
AUX
mode. If you’re not
programming in
AUX
mode,
skip to step 4.
4
Press
POWER
.
This puts your remote in the
scan mode.
5
Press the
UP
or
DOWN
ARROW
repeatedly until
the equipment turns off.
As you press the
UP
or
DOWN
ARROW
, the remote tries each
code in the memory to see if it
can turn off your equipment.
When the equipment turns off,
you have found a code that
might work.
Note
: The mode button for the
equipment will flash rapidly
eight times when you’ve
scanned all the codes for that
equipment.
6
Press
POUND
(#).
The mode button flashes three
times if you have entered the
code correctly. This stores the
code you found.
7
Turn the equipment back
on and try some other but-
tons to make sure they
work.
Press
POWER
to turn the
equipment back on. Try some
other buttons to make sure they
work. Sometimes POWER
works when other buttons
don’t.
8
If necessary, repeat this
procedure until you’ve tried
all the codes.
You may need to repeat the scan
to find the best code for your
equipment.
Instructions
Additional Information
5.3 Replacement.book Page 5 Friday, November 24, 2006 12:00 PM