5
E
NTERING
E
QUIPMENT
C
ODES
10
If the code worked for
other buttons, select
Yes
and continue with step 11.
If the code did not work,
select
No
and repeat steps
6 through 9 for the next
code for your brand.
Choose the code that provides
the remote with support for the
most device functions. If you
wish to verify the support of
volume and mute functions, go
to step 13.
11
On the Home screen,
confirm that the device’s
brand name you found in
step 5 is in parentheses
after a four-digit code.
You can program the remote to
control your TV in TV mode
and other devices in DVD and
AUX modes. Repeat these
instructions for each mode.
12
OPTIONAL—For setting
up a TV2 remote:
Select
Auto Tune from the
Remote Control settings
screen to manage this
feature.
NOTE: This is not
an active feature.
Auto Tune is a feature to help
keep a TV2 tuned to satellite
programming. When enabled,
pressing the SAT button on a
linked TV2 remote tunes that
TV automatically to a specified
channel or input (source).
13
If you wish to change the
device used to control
audio volume:
Select the
Volume option from the
Remote Control settings
screen and follow the steps
in
Switching Between TV
and Amplifier Volume Con-
trol
on page 8.
If you have connected your
ViP922 DVR receiver’s audio
output(s) to an audio amplifier
or A/V receiver, then you may
want to change which device
controls volume and mute from
the default of the TV to one of
these AUX devices you have
programmed in AUX mode.
Instructions
Additional Information
1
Turn your equipment on.
Use your equipment’s front
panel buttons or its own
original remote control.
Instructions
Additional Information
