44
EN
EWS3 – Wireless Indoor Siren
3. INSTALLATION
1. Open EWS3 enclosure.
a. Press and hold
b. Pull down
3
2. Once the enclosure is opened, fix the siren to the wall using the screws.
+
+
-
-
-
+
-
+
MOUNTING POINT A
MOUNTING POINT B
MOUNTING POINT A
Ensure to screw in properly for supervision of the back side by tamper switch
MOUNTING
POINT B
4
5
3. When installing EWS3, follow the recommendations for the installation to achieve the strongest wireless signal:
Wireless
device
6
Never install in the following
locations:
•
inside the metal cabinet
•
closer than 20 cm from
the metal surface and/or
power lines
Wireless
device
5 m to 30 m
inside the building
0.5 m to 150 m
in open areas
ELDES alarm
system wireless
antenna
7
Recommended:
•
face the front side of the
wireless device towards
ELDES alarm system’s wire-
less antenna
•
keep the distance: 0.5 m to
30 m inside the building, 0.5
m to 150 m in open areas.
EPIR2
Wireless
device
0.5 m to 30 m
inside the building
0.5 m to 150 m
in open areas
8
Recommended:
•
face the front side of the
wireless device towards
the front side of EPIR2
•
keep the distance: 0.5 m to
30 m inside the building,
0.5 m to 150 m in open
areas.
4. Remove the plastic tab inserted between one of the battery terminals and battery slot contacts.
9
5. STATUS indicator should start flashing indicating successful data transmission.
