ESIM120 GPRS USER ManUal
5
1111 setg
prs:type:
client;ip
:192.168.
1.1;port:
15000
2.3. GPRS activation
Connection via GPRS can be activated and login data (username and password)
can be requested by SMS message which is used in several cases, i. e.:
•
To activate connection using standart GPRS parameters (see Table 1),:
Here “profile1” is the code name of the used standart GPRS parameters.
•
To activate connection using one-time GPRS parameters. Use one-time GPRS parameters
when you want to change only one or several parameters from the standart GPRS parameters
and use it only for upcoming session.
Here “settings” and “parameters” are corresponding entries from Table 1. For example,
sending SMS message „1111 connect:type:client“ you indicate to ESIM120 to work in Client
mode in the upcoming session (other parameters will be the same as standart GPRS parameters). To specify more than
one parameter, you have to separate settings and parameters with ';' symbol (for example, sending SMS message „1111
connect:type:client;timeout:25“ you indicate to ESIM120 to work in Client mode for 25 minutes).
example:
xxxx_setgprs:apn:internet;user:web;psw:web
AttentIon:
the administrator can also receive login data (username and password) by making a call to the mobile phone
number of the SIM card. However, this method can be activated only by performing particular configurations using ELDES
software or by connecting via Internet browser.
2.4 Additional Commands via SMS Messages
Remaining Session time Request
Send SMS message with the following text:
You will receive the reply by SMS message with the time remaining until the end of the session. The
time is presented in minute-accuracy (when the last minute remaining is left, the time is presented
in second-accuracy).
Stopping the on-going Session
To terminate the on-going session without waiting for it to end send SMS message with the following
text:
Restoring GPRS Connection
This command is used only in the case particular GPRS connection interruptions are present (for
more information refer to chapter 3). Send SMS message with the following text:
xxxx_connect:profile1
xxxx_connect:settings:parameters
ESIM 120
1111 conn
ect:profil
e1
ESIM 120
1111 conn
ect:type:
client
xxxx_session?
xxxx_stop
xxxx_gprsreset
ESIM 120
1111 sess
ion?
ESIM 120
1111 stop
ESIM 120
1111 gprs
reset
