background image

Weather Forecast and Barometric Pressure Trend

 – The weather 

station has a built-in barometer to measure atmospheric pressure 

and forecasts the weather with icons for Sunny/Partly Cloudy/Cloudy/

Rainy/Stormy. The unit predicts the weather conditions of the next 

12 to 24 hours based on the atmospheric pressure and is about 70% 

correct. The company accepts no liability for any incorrect weather 

forecast. A weather trend indicator bar is shown below the time 

display and shows Rising/Steady/Falling trends.  

If the weather icon is not displaying correctly, please be sure your 

altitude setting is correct for your location.

LCD Display

 – To have the color LCD display backlight on all the 

time, slide the Backlight switch on the rear of the Receiver to the 

ON position.  This function is only available when the AC Adapter is 

powering the Receiver.  To turn off the color LCD display, switch the 

Backlight switch to the OFF position.  When the switch is in the OFF 

position, you can view the LCD backlight display for about 15 seconds 

by pressing the SNOOZE/LIGHT button on top of the light bar.  The 

color graph display represents the IN/OUT temperature. When the 

temperature changes, the number of the illuminated bars will also 

change.  

6

Summary of Contents for 47019











Reviews: