CHARGING THE EXTERNAL DEVICE
This unit has a USB which can charge your Cell phone or MP3 player if
they have a built in Mini USB port to accept external charging power.
Because of large variety of cell phones and different circuitry,
not every cell phone or MP3 device with Mini USB can be
charged in this way. Refer to your cell phone or MP3 player user
manual before you charge them in this way.
1. Open the Connector Rubber Dust Cover.
2. Use a USB to Mini USB cable(not included) to connect the unit and
your external device which has a Mini USB port.
3. Plug the end with USB to USB Jack of the unit, plug the other end
with Mini USB to Mini USB port of your external device.
4. Set the Charger IN/OUT Switch to “OUT” position.
5. Set the Power Source Selector to "OFF" Position.
6. Follow below procedures to charge your external device.
Turn the hand crank to start charging your external device.
It is recommended you charge your external device when its
battery goes low. It is more difficult to crank charge an external device
when its rechargeable batteries are completely exhausted.
NOTE:
Dynamo Charging
Note:
-
14