CHARGING THE INTERNAL BATTERY
1. DYNAMO CHARGING
NOTE:
2. COMPUTER USB CHARGING
NOTE:
3. AC ADAPTOR CHARGING
1. Install Ni-MH batteries correctly.
2. Set the Power Source Selector to "OFF" position.
3. Turning the hand crank, the built-in dynamo will start to generate
electricity. The unit will charge the Ni-MH battery automatically.
4. While charging, the Charging green LED in front of the unit will be
on.
The brightness of LED lights shows the charging intensity of the batter
power
While the intensity of the battery power is limited, when the
battery level indicator goes RED, the rechargeable Ni-MH batteries
are low, you can turn the hand crank to generate electricity for
emergency.
1. Install the Ni-MH batteries correctly.
2. Set the Power Source Selector to "OFF" position.
3. Open the Connector Rubber Dust Cover, set the Charger Switch to
IN position.
4. Use a standard USB to USB cable (not included), plug one end with
USB into the computer USB port. Plug the other end into USB jack of
the unit. It will start charge the Ni-MH battery automatically when your
computer is ON.
5. While charging, the Charging green LED in front of the unit will be
on.
Before the first use, we recommend to charge the Ni-MH batteries
for 4 hours the maximum. Please do not charge the battery longer than
recommendation as it will shorten the battery life.
1. Plug the AC adaptor into a household AC outlet.
2. Set the Power Source Selector to "OFF" position.
3. Open the Connector Rubber Dust Cover, set the Charger switch to
“IN” position.
12