Operation
1.
Turn radio ON.
2.
Press “
CD
” butt
on. Track/Disc number will be displayed only if there is
a disc in magazine
otherwise “NO MAGAZINE” is displayed (See
Fig. 12
)
Fig. 12
3.
Connect audio device to 3.5mm jack using Free 3 ft. Audio cable (See
Fig. 12
).
Fig. 12
3.5mm male to male cable
4.
Place audio device in playback mode. This interrupts CD changer
Playback and music from Audio device will play on car speakers.
5.
Use radio volume control button to set playback level and audio device
volume setting to match CD or radio playback levels.
6.
Warning: Song display, playlist and Track selection is *NOT* possible
from radio. Must use audio devices built-in controls to access audio
files.
7.
To listen to the CD changer, simply
disconnect the 3.5mm audio
cable from the jack
and operate changer as customary (Jack must be
empty during CD changer playback otherwise playback may include
noise or buzz)
8.
If correct operation is confirmed go ahead and reinstall radio
