Fig. 9
Adapter connections
Warning:
Single DIN radios (e.g. LJB4100BA) most XK vehicles
the radio
ground strap
(See
Fig. 9a
) may need to be relocated. This
applies only to single DIN radios in non-premium vehicles with ground
strap.
Fig. 9a
10.
Connect adapter male plug to radio CD port (
don’t force
, twist or
wiggle
)
11.
Carefully route audio jack (See
Fig. 10
) to front of dashboard or nearby
location to be mounted (within 4 ft.). Mounting location will vary based
on vehicle and customer’s preference.
Fig. 10
Audio Jack
12.
Drill a ¼” (6.35mm) hole a
t chosen location and secure jack to dash
with nut (See
Fig.11
)
Fig. 11
Warning:
Should you decide to mount audio jack, make sure mounting panel
is no thicker than
1/8”
for jack shaft to engage with nut. (If necessary, use
a Dremel or sander to thin panel). Mounting audio jack is not necessary but
doing so makes for a stock appearance and easier to connect and
disconnect your audio devices.
