PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
Requirements
CD auto changer
Introduction
Those Jaguar owners who are adamant about hanging on to the original radio
and audio system we offer a line of adapters that sure to open up a whole lot of
different options for listening to music and other audio content.
The JAG-CD
adapter provides a 3.5mm Audio jack which can be used to connect and play all
kinds of audio devices including Smartphones, MP3 Players, iPods, Zune, iPads
etc. The JAG-CD auxiliary input adapter does not control or charge audio device
and connects to the back of the radio in
late 1997-99 XJ (X308) and XK (X100)
Standard OR Premium Audio Systems
and 2000-03 XJ (X308) and 2000-
06 XK (X100)
Standard Audio Systems only
. See
Frequently Asked
questions
at the end of this guide for more details.
Installation
Warning:
The JAG-CD connects to
the radio
(not to Changer) and radio removal is
required.
All 2000-03 x308 and 2000-06 x100 premium sound system (amplifier)
requires the
This step may not be necessary but we recommend disconnecting the
Negative Battery Terminal (See
Fig. 1
)
Fig. 1
1.
Move “J” gate selector to position “D”
2.
Using a panel removal tool, unclip and remove “J” gate
finisher (See
Fig. 2
)
Fig. 2
3.
Using a T30 torx head, remove “J” gate finisher plate
(See
Fig. 3
)
Fig. 3
