background image

Frequent asked questions 

1.

 

Does the iP2D-BKR work on all Becker Radios? 
NO

the iP2D-BKR works on Becker radios with AUX Menu option. Will not 

work on non-AUX Ready radios such as CDR-210, CR-210, CR-1, PCM etc.

 

2.

 

Can I control Smartphone music from radio buttons? 
NO;

 

you 

must continue to use device built-in controls and display.

  

3.

 

Can I pair or save more than one device to the iP2D-BKR? 
YES;

 more than one device (slaves) can be paired however only one 

connection can be active at a time. 

 

4.

 

During playback I can hear noises that increases with engine speed. Is 
this normal? 

If you experience alternator whine (increases with engine speed), we 
recommend adding a noise filter 

(e.g., NF3A

5.

 

Can I use this module to make/receive phone calls? 
NO;

 

This module supports music streaming, but does not support hands-

free calling. Purchase ou

A2DIY-BKR

 for hands-free and music streaming 

6.

 

Does this module work on Mercedes BE1492, BE1692, BE2210, BE1350), 
Alpine (CM2296 and CM2396) Radios? 
NO; 

these are Alpine derived radios that require ou

A2D-MBCD 

7.

 

My vehicles has a CD changer. Will I be able to use it along with this 
module? 
NO;

 

optional CD changer 

must be disconnected and will no longer work.

  

 
 

 

 
Disclaimer 

• This product has no affiliation with Porsche, Becker

 etc. 

• We’re

 not liable for misuse of this product. 

•We recommend professional installation.

 

Email 

[email protected]

 

© 1995-2021-07-19Jul-21 Discount Car Stereo, Inc. All rights reserved. Information in this 
document is subject to change without notice. Other products and companies referred to herein 
are trademarks or registered trademarks of their respective companies or mark holders

 

Summary of Contents for iP2D-BKR










Reviews: