Fig. 12
Module USB port
3.
Snap USB head (See
Fig. 13
) in place and flush with mounting surface
(See
Fig. 14
)
Fig. 13
USB head
Fig. 14
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of module and
mount USB support bracket (See
Fig. 15
) to surface using
adhesive/tape or screws (included).
Fig. 15
USB mounting bracket
2.
Insert male terminal through hole in bracket (See
Fig. 16
) and connect
to module USB port (See
Fig. 12
)
Fig. 16
3.
Snap USB head (See
Fig. 16
) to bracket until flush (See
Fig. 17
)
Fig. 17
4.
Tuck and secure any extra wire away from moving parts and test
operation (
See Bluetooth Pairing and Connection
)
