Photo courtesy of customer
’s
custom install
Exercise caution when routing microphone so to not damage cable
and ensure no ventilation duct is pointed towards microphone
.
USB charging port
(not for thumb drives etc.)
Module built-in USB charging port supports 1.8A charging current
which may or
may not be enough to charge newer power-hungry device (e.g., iPhone 8, 11, 12
etc.)
. Should you decide to use it, we suggest one of 3 connecting options:
A
.
Flush to dash/panel requires drilling a ¾” hole
B
.
Flush with mounting bracket
(place USB terminal wherever your installation
demands without drilling)
C
.
USB port-
(default)
A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
(See
Fig. 10
)
Fig. 10
Step drill bit
2.
Insert supplied 3ft. USB male terminal (See
Fig. 11
) through hole created
in step 1 and connect to module USB port (See
Fig. 12
)
Fig. 11
Flush mount 3 ft. USB cable
