Fig. 5
dip-switches
5.
Connect Red Accessory wire to vehicle
12V accessory/switched
power supply
Warning:
Red accessory wire should not be connected to battery
supply.
6.
Secure module and move on to next step.
Pairing:
Pairing process varies by device but the basic steps are the same. This process
is done upon initial install and will not have to be repeated
1.
Turn Ignition and stereo “ON”
2.
Go to device
Settings, Wireless & Networks, Bluetooth Settings
3.
Select
Bluetooth
and turn on.
4.
Select Bluetooth settings
5.
Tap
Scan for devices
.
6.
Wait for Bluetooth device name to appear and select it.
LED inside module will glow steady when paired
