
Introduction:
If your Ford, Lincoln, Mercury or Jaguar is wired for or has optional CD Changer
in trunk, center armrest, hatch etc. the BLU-FRDW will upgrade vehicle to
support modern media formats via Bluetooth.
The BLU-FRDW Bluetooth music
streaming receiver
connects to the 12-pin factory CD Changer plug
to allow
users to wirelessly stream music, audio books, navigation and other apps from
Smartphone, iPad, Tablet, Kindle, Laptop etc. No more wires on or near dash, just
pair-up and jam!
Warning: Remote CD changer (if present) must be disconnected.
Purchase
to retain CD changer playback.
Installation:
(To pre-wired 12-pin plug)
This module connects to the
12-pin plug in remote location
which means
removal of the factory radio is not required.
1.
Locate 12-pin plug (See Fig 1) or if vehicle has a CD changer, disconnect
plug from changer (See
Fig. 2
)
Fig. 1
Factory 12-pin plug
Fig. 2
CD Changer
2.
Connect factory 12-pin plug to 12-pin connector on installation harness
(See
Fig. 3
).
Fig. 3
12-pin connector
3.
Connect 22-pin Molex plug from installation harness (See
Fig. 4
) to the
22-pin connector on Module (See
Fig. 5
)
Fig. 4
Fig. 5
22-piin Molex connector
4.
Set dip switches #
2 & # 8 t
o “ON” or down. All others should be “OFF”
or Up (See
Fig. 5)