PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and may
require additional steps. We do not accept responsibility for third party labor charges or
modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from the
installation of this product.
•
Careless installation and operation can result in equipment damage
Requirement
Porsche CR-1 or CR-2 radio
Introduction
If looking to add
Bluetooth®
features to Porsche CR-1 or CR-2 radios you should
consider the A2DIY-CR12adapter kit. This revised easy to install kit is essential to
adding
Bluetooth®
features to older Porsche vehicles while keeping everything
stock. This
“triple play”
module supports
aptX
"CD-
like’ high quality audio for
streaming music and sounds great for
(1)
mobile conversations,
(2)
streaming
Pandora, Sirius radio, Apple music, audiobook, podcast and
(3)
CD changer
retention OR an AUX input for vehicles without changer. Use included media remote
control to adjust Smartphone: volume, track up/down/pause and more and can be
mounted to steering wheel or dashboard. In addition, an optional
“Smart
charger
’
kit helps to keep devices charged while on the road. Thanks to the A2DIY-CR12 kit,
Porsche owners can update to
Bluetooth®
without changing original radio.
Warning:
Porsche CR-1 and CR-2 radios are coded and will not operate without
the code. Do not proceed with step 7 if radio code is unavailable otherwise radio
will not operate upon reconnection.
See
Frequently Asked question
at the end of this guide for more details.
Installation 1
Use these steps for vehicles without CD changer or if changer is no longer
wanted and/or disconnected.
Radio removal required to gain access to connectors.
Remove trim ring and ensure both tabs are centered at which point radio is pulled
from dash (grasping the cassette opening provides some leverage) or push from
rear.
1.
Connect 13-pin adapter plug (See
Fig. 1
)
to radio 13-pin
connector
(See
Fig. 2
)
Fig. 1
Fig. 2
radio connector
