The ReflexMax is a high performance CD-R disc duplicator designed for both
the novice and professional user. It is designed for a variety of applications
that require the exchange of audio, video or data content. The following is a
User Guide that outlines the menu commands of the unit and immediate func-
tions of the unit. For additional technical support please call
1-888-800-4041
.
GETTING STARTED
Carefully remove the ReflexMax duplicator from its shipping container. Please
inspect the contents and verify them against the packing slip. Be sure to report
any errors in shipping immediately to Disc Makers.
Packing materials:
Please save the original box and packaging in the event the
unit requires future service or you need to move the unit from one location to
another. This will help reduce the possibility of damage in transit.
Please Note:
Any item that needs to be returned for a warranty repair must be
returned in original packaging. (See Page 2.)
I
NSTALLATION AND
S
ETUP
1. Unpack the ReflexMax and place in a clean and cool work area. Keep the
external packaging for future storage and transportation.
2. Place the ReflexMax on a flat, clean, and dust-free surface.
3. Connect the power cord from the back of the unit to an electrical outlet. Do
not bypass the Ground.
4. The front panel should appear as below.
M
ODES AND
C
OPYING
M
ODES
The ReflexMax is able to duplicate in two different modes:
Hard-Drive-to-Disc
and
disc to disc
. The unit is factory preset to
Hard-Drive-to-Disc
. This mode is
efficient for duplicating large numbers of discs. The
Hard-Drive-to-Disc
copies
the master to the hard drive and then copies the data to each of the drives. This
ensures an exact copy of the original master to every disc.
The
Disc-to-Disc
mode will copy whatever is in the source
Src
drive to blank
media in the other drives in the unit. This mode is most effective for making
quantities of discs less than the number of drives in the unit. For the
ReflexMax4, if the need is for three discs or less, use the
Disc-to-Disc
mode.
For the ReflexMax7, if the need is for six discs or less, use the
Disc-to-Disc
mode.
Only slight changes will occur in the functions of the unit when the different
modes are chosen. When the unit is in the
Hard Drive-to-Disc
mode
P: A
will
appear at the right side of the first line of the
LCD
.
P
indicates the master disc
will be written to the hard drive, and the next letter indicates which partition
the file will be written to.
H
ARD
-D
RIVE
-
TO
-D
ISC
C
OPYING
Upon powering up the ReflexMax, the following should be displayed on the LCD
screen:
1-888-800-4041
www.discmakers.com
T
05
Set
u
p
1. Copy
P:A
