User Guide 1.0
3
www.discmakers.com/techsupport
Copies USB Cards or USB Drives. All contents of the
source drive will be duplicated to all target card(s)/drive(s)
DEScRIPTIon
IV.
Menu Overview
1. copy
2. compare
FUncTIon
Performs a bit-for-bit comparison between the source
drive and copied card(s) / drive(s)
3. copy+compare
Copies the source drive, and then immediately follows with a bit-
for-bit comparison between the source and copied card(s) / drive(s)
to ensure exact duplication
4. Information
4.1
USB/SD Info
Shows the basic information on the USB card(s) / USB Drive(s)
inserted, such as flash type, content size, and available space
4.2
System Info
Shows information of the duplicator system, such as controller model
number, system memory capacity, and software version
5. Utility
5.1
Quick Erase USB/SD
Erases the index of USB Drive in the writer tray
5.2
Full Erase USB/SD
Completely erases all data of USB Drive in the writer tray.
This process takes longer than Quick Erase
5.3
System Update
Updates the firmware version in the system
6. Setup
6.1
Start-up Menu
Allows user to select which function is shown first when the
duplicator powers on
6.2
Analyze Source
Enabled (ON) to copy data only. Disabled (OFF) to copy the entire
USB Drive
6.3
Button Beep
Turns audio signal on or off when a button is pressed
6.4
Asyn Hold Time
Sets the time the system waits to continue duplication jobs in
Asynchronous mode before exiting
6.5
Ignore Size
Allows user to set the tolerance of capacity difference between the
source and the target
6.6
Asynchronous
6.7
Language
Allows user to enable or disable Asynchronous copy mode
Sets system language interface.
t
Reflex
Flash
