background image

MacElite Setup Guide 

 

 

 

Service and Contact Information 
 

 

Free lifetime technical support. 

 
Disc Makers' Technical Support Department is here to help you every step of the way with your
duplication system. Our goal is to minimize your downtime and maximize the return on your
investment. We offer FREE technical support to you for as long as you own your duplicator. If you
run into any problems or have any questions, call us at 1-888-800-4041. 
 
 
 

Our tech support hours are 9am to 5pm EST Monday through Friday.  

 
 

Toll Free Service Number  1-888-800-4041    

 
 

Service Email  

[email protected]

 

 

Support & Download Website 

www.dmelite.com

  

 

For Supplies and Accessories, visit 

www.discmakers.com

 

 

Please register your Elite unit by visiting 

http://www.dmelite.com/register

 

This will allow you to be notified of future software upgrades 

 

Whenever you contact Discmakers please have the serial number listed in the front of this manual
or on the rear of the EliteMicro, so a customer service representative can log onto your account.
Discmakers utilizes one of the most advanced trouble-ticket monitoring solutions. We track any and 
every exception or trouble ticket to verify that you are completely satisfied with your purchase. 

 
 

You are our customer and we will meet your needs and exceed your expectations! 

 

 
 

 

 

Disc Makers 

Plant and Main Office

  

7905 N. Route 130 

Pennsauken, NJ 08110-1402 

 

Toll Free 800-468-9353 

Local 856-663-9030 

Fax 856-661-3458 

 
 

Summary of Contents for MacElite 2



























Reviews: