Disan MATRIX RANGE, User Manual, Page: 11 / 20

5.4 Connection to pipe network
1. Connect with the muff and clamps included the
middle side inlet in with piping network
2. Connect with the muff and clamps included
the outlet with the exhaust line.
3. The silences (optional) can be connected
near the exhaust grid.
5.5 Electrical connection
Before plugging in the central unit make sure that the main power supply correspond to the
voltage requirements written on the label, which referred to the data on the identification
plate. The manufacturer declines all responsibility for damages to persons or objects due to
an electric system not in compliance with the regulation in force.
• Connect the low-voltage starting cable
• Plug-in the main electric cable.
1
2
3
5.3 Fixing the central unit
Inside the packaging you will find the special installation template to easy the position and
fixing, as well as the installation wall plate.
1. The template should be fixed on the
wall where the central unit should be
installed. For reference the inlet and
outlet should be considered.
2. Mark the drilling point through the template.
3. Arrange the plate on the wall.
4. Hang the central unit on the wall plate.
5. Hang the suction unit the frame.
8