background image

Danish Interpretation Systems 

 

User Manual 

Manual 01 18 04466 

 

13

 Technical appendix 

Cabling 

CAT5  

The DCS 6000 system uses CAT5, CAT5e or 
CAT6

 

FTP or STP cables with screened RJ45 

connectors.  

It  is important to

 

use

 

only FTP or STP

 

(screened) cables and screened RJ45 connectors 
and not UTP cable, which is unscreened. 

EIA 568-B wiring shall be used.  How to wire a 
CAT5 (EIA 568-B) Cable : 

Pin  Function 

Connector

 #1

  Connector

 #

In-going + 

ORG/WHT 

ORG/WHT 

In-going - 

ORG 

ORG 

+48V 

GRN/WHT 

GRN/WHT 

0V 

BLU 

BLU 

0V 

BLU/WHT 

BLU/WHT 

+48V 

GRN 

GRN 

Outgoing - 

BRN/WHT 

BRN/WHT 

Ou 

BRN 

BRN 

Note.   If other colour codes are used then the four 

pairs are connected as follows: 

Pair 1: 

Pin 1 & 2 

Pair 2:  

Pin 3 & 6 

Pair 3: 

Pin 4 & 5 

Pair 4: 

Pin 7 & 8 

The phase of the pairs must be correct and the 
wiring spec. as stated in CAT5 (EIA 568-B) have to 
be followed. 

Note: CAT6 cables can normally only be 
terminated in sockets (female) and not in cable 
plugs. CAT6 should thus only be used for long 
cable draws terminating in wall outlets or patch 
panels. 

Accessories (not supplied) 

Cat 5e Connection Cables (AWG24)

 

EC 6000-..5 Connection Cable 0,5 m ......................10 03 12500 

EC 6000-01 Connection Cable 1 m .........................10 03 13101 

EC 6000-02 Connection Cable 2 m .........................10 03 13201 

EC 6000-05 Connection Cable 5 m .........................10 03 13501 

EC 6000-10 Connection Cable 10 m .......................10 03 14102 

EC 6000-20 Connection Cable 20 m .......................10 03 14202 

EC 6000-50 Connection Cable 50 m .......................10 03 14502 

Set of 1HU - 19” Brackets........................................................... 

Technical specifications 

General 

Power consumption  ....................................................max. 10W 

Temperature to guarantee specified performance 

............................. 5 Deg C. to 40 Deg C. (35 to 80% humidity) 

Storage temperature 

..........................-20 Deg C. to 60 Deg C. (10 to 80% humidity) 

Weight................................................................................... 1 kg 

Dimensions (W x H x D) ..............................264 x 42 x 128 mm 

Dimensions with 19” brackets...................482,6 x 44 x 128 mm 

Connectors 

DCS-LAN loop through ........................................2 pieces RJ45 

DCS-LAN repeated output ....................................4 pieces RJ45 

Specifications are subject to change without notice. 

 

Summary of Contents for Repeater RP 6004















Reviews: