Unpacking and Assembly
Your tiller will require some assembly. The following instructions will
help you unpack your tiller, assemble and adjust the depth regulator
lever, cable tension and handlebar height. You will need two 9/16”
wrenches.
Unpacking
Open top of carton and remove the tiller components.
Tiller Components
Upper Handlebar left
Upper Handlebar right
Lower Handlebars left and right
Handlebar Face Plate
Handlebar
Wheels/Depth Regulator
Safety Shields
Tine Blades (2)
Engine Assembly
Driver Safety Control Lever (with cable)
Throttle Assembly (with cable)
Hardware
DO NOT ADD ENGINE OIL TO THE
TRANSMISSION GEAR CASE
The tiller transmission is filled at the factory.
DO NOT ATTEMPT TO START ENGINE
BEFORE ADDING OIL TO ENGINE
The engine is shipped from the factory without oil. You must add
engine oil before starting the engine. Use only the recommended
weight of oil for a 4-cycle engine (See Engine Operation Manual).
7
!
CAUTION
!
CAUTION
