Item # Part #
Description
Qty.
1
100104 Tank & Engine Assembly
1
2
100062
Wheel/Tire Assembly, 4.80 x 8 in.
2
3
100142 Flat Washer, 3/4 in.
2
$BTUMF/VU$MFBS;JOD
$PUUFS1JOJOYJO
6
100063 Hub Cap
2
7
100162 Hub Cap Tool
1
i85(%5(5"&5--'&3
Installing the wheels:
1. Remove disposable spindle covers and wheel bearing covers.
4MJEF
Wheel/Tire Assembly
on to the spindle with valve stem
of tire facing outwards.
3. Install the
Flat Washer
, 3/4 in.
onto the spindle.
4. Thread the slotted
Castle Nut
, ¾ in.
onto the spindle. The
slotted nut should be driven down with a 28mm socket only
UJHIUMZFOPVHIUPFMJNJOBUFUIFGSFFQMBZPGUIFXIFFMBTTFNCMZ
and not tighter. Make sure that the wheels can freely rotate. The
Castle Nut needs to be oriented to allow for the installation of the
Cotter Pin
, 1/8 in.
.
5. Install the
Cotter Pin
, 1/8 in. 5 through the
Castle Nu
t, ¾ in.
BOETQJOEMF#FOEQJOFOETBSPVOETQJOEMFUPTFDVSFJUTQPTJUJPO
6. Install the
Hub Cap
using the
Hub Cap Tool
. Gently tap on
the hub cap tool with a hammer to drive the hub cap into place.
7. Repeat these steps to install the 2nd wheel.
14
