BACK VIEW
FRONT VIEW
FRONT VIEW
1. Handle Grip
2. Front Panel Release Handle
3. Front Panel
4. Headlight
5. Bumper
6. Clear Dirt Window
7. Hose
BACK VIEW
8. Upper Hose Wrap
9. Cord Guide
10. Dust Brush
11. Tool Caddy
12. Extension Wand
13. Extension Wand Holder/Hose Clip
14. Wheels
15. Handle Release Pedal
16. On/Off Pedal
17. Lower Cord Wrap
18. Power Cord
19. Crevice Tool
20. Upper Cord Wrap with Quick Cord
Release
5
1
2
5
6
7
8
9
11
14
12
15
16
17
10
4
14
18
3
19
20
13
FEATURES
6
HOW TO ASSEMBLE
WARNING:
BEFORE
ASSEMBLING THE BODY
OF THE CLEANER TO
BASE,
MAKE SURE
POWER CORD IS DOWN
AND OUT OF THE WAY
TO
AVOID PINCHING
CORD.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
1.
HANDLE
BASE
BODY ASSEMBLY
Place the body of the cleaner onto base (Diagram 2).
Push together firmly. Insert longer screw into the
front of body of cleaner to secure (Diagram 2a).
2.
2a.
4.
Place front panel on
by putting its bottom
tab in the slot on the
vacuum (inset). Close
until it snaps into
place (Diagram 3).
Slide handle down
onto the body of the
cleaner.
HANDLE ASSEMBLY
Tab
Slot
3.
Insert tab on tool caddy into
slot above screw holes on
back of handle.
Bring tool caddy down to fit against
handle. Insert two (2) screws to secure
caddy and handle sections. Tighten
screws to secure.
Push curved end of hose
onto the back of unit.
5.
1.
Hold lower cord wrap in
place while inserting
one (1) screw. Tighten
until secure.
Hold Extension Wand Holder/Hose Clip in
place while inserting one (1) screw.
Tighten until secure.
2.
BACK VIEW
3.
4.
Wrap hose around storage
hook as shown.
STORAGE
HOOK
6.
HOSE ASSEMBLY
TOOL CADDY, HOSE, AND TOOL ASSEMBLY
