Warning
• Don’t use your carpet washer to
pick up hot coals, cigarette butts,
matches or smoking hot burning
items or use in an area where there
may be harmful fluids (chlorine,
bleach, and ammonia drain
cleaner).
• Don’t over saturate your carpet.
• Don’t use the carpet washer with
incorrect voltage as this may result
in damage or injury to the user.
The correct voltage is listed on the
ratings label.
DON’TS CONTINUED...
• Check with the manufacturer of
your flooring prior to using the
carpet washer.
• The clean water tank should only
be filled with warm water (max
40
o
C). Filling the clean water tank
with hot or boiling water may
damage your machine and
invalidate your guarantee.
• Store your carpet washer in a
cool, dry area. Before storing your
carpet washer please ensure all
water solutions tanks and filters are
thoroughly clean and dry.
• Always vacuum your carpets
thoroughly before using your carpet
washer.
• Always unplug the carpet washer
before carrying out any
maintenance and before
connecting or disconnecting the
hose/accessories.
• Turn off all controls on the carpet
washer before disconnecting or
connecting the power cord, after
use always wrap the power cord
around the cord clips provided.
• Always replace the fuse in the
plug with a 13amp fuse. Always
protect the power cable from
heated surfaces or near open
flames.
• Always keep the power cord away
from the brushes whilst using your
carpet washer.
• Use only CE approved 13amp
extension cords, non-approved
extension cords may overheat.
Care should be taken to arrange
the extension cord as it can be a
trip hazard.
• Take extra care when cleaning on
the stairs.
• Always use the carpet washer with
all water/solution tanks and filters in
place.
• Keep all openings clear and free
from debris as this may affect the
airflow/suction.
• Always use the carpet washer in
an upright position. To prevent
motor damage from dirty water,
never hold the carpet washer
upside down or lay on its side.
PLEASE KEEP INSTRUCTIONS
FOR FURTHER USE.
DO’S