PlACE DIRTY WATER TANk IN
BASE OF ClEANER
1. Place carpet cleaner
on a fl at surface.
2. Tilt carpet washer
backwards and line up tabs
under nozzle with front of
base on carpet washer.
3. The nozzle should be fl ush
with the base. If it’s not,
this will result in poor
water pickup.
4. Now place the rear of the
tank into the base of the
cleaner. Push handle down
until it clicks.
iMPortant
If you hear a noticeable change in the pitch of the cleaner, this indicates a need to empty the dirty water tank.
HOW TO
15
