REmOvE THE BRUSHBAR
Note: Be sure to switch off the unit, unplug & remove the clean & dirty water tanks before servicing.
1. Flip your carpet washer on
its side like this.
2. Use a cross-head screwdriver
to remove the 3 screws here.
Now pull cover off.
3. Keeping tension
on the belt, use
two hands to lift
the brushbar up
and out.
5. Replace belt
cover and
secure with the
three screws.
Caution
To reduce the risk of injury from moving parts, unplug
cleaner before servicing. Rotate brushroll manually to
make sure belt is not twisted or pinched.
A
4. Line up brushbar
with base, push
into place.
Make sure the
brushbar ends
are in the correct
orientation (A).
16