14
This vacuum cleaner is not free standing and should be
disassembled before storing.
CAUTION
REMOVE BLOCKAGES
FROM POWERED HEAD
1. Using scissors remove any
threads or hair from around the
brushbar and clear any dirt or
debris from powered head.
1. The red light on the powered
head will illuminate to indicate
there is a blockage. Switch the
vacuum cleaner off and clear
the blockage.
2. Reset the powered head by
turning the power back on to
position
II
after the blockage has
been cleared. The brush will spin
and a green light on the powered
head will illuminate
.
RESET THE POWERED HEAD
REMOVE BLOCKAGES
FROM REACH WAND
1. To test for a blockage in the reach
wand, look through the wand to
check if it is clear. Use a broom
handle or similar blunt object to
remove any blockage.
