
45
3. Walk assist feature
:
This feature is designed to allow the motor to push
the bike along while you walk beside it, up a
parking ramp for example.
In order to activate the walk assist feature, please
turn on the bike
and
press and hold the "-" button
4.Unlocking the throttle
:
Please note the bike's throttle max speed has been
limited to
6km/h
to be compliant with Australian
standards. However, you can unlock the limit only if
you intend to use the bike for off-road use only by
the following steps:
> While the bike panel is off,
twist the throttle to the
max and pull and hold one brake lever
> While the throttle is twisted to the max and one
brake lever is pulled,
turn on and then off the bike's
panel three times.
DiroDi xTreme Assembly Guide -
Operating the bike
Summary of Contents for xTreme
