DiroDi xTreme, Assembly Manual, Page: 41 / 47

DiroDi xTreme Assembly Guide - Rear Derailleur Adjustment
41
1. Rear Derailleur is adjusted in the factory but due to
part movements during shipment, slight re-adjustments
might be necessary. Derailleur adjustment are done by
barrel adjuster and
"H" and "L" screws as shown in
photo 1.
Please refer to the video in the link below: How to
Adjust a Rear Derailleur – Limit Screws & Indexing
https://www.youtube.com/watch?v=UkZxPIZ1ngY
> 1
** Please note as the derailleur is already adjusted in the factory,
any issues in changing gear between gear #2 to #7, should be
easily solved by turning the barrel adjuster (As per instructions in
the video). After the gears are smoothly changed between gear
#2 to #7, please test gear #1 (the largest cog) and #8
(the smallest cog). If you have any issues on gear #1, you need
to adjust the "L" screw and if you have any issues on gear #8,
you need to adjust the "H" screw as explained in the video.
> 1