Displaying Device Information
The
Status
page is automatically displayed after logging in to Maestro. This page displays video
and audio input/output information, firmware version, and status messages.
1.
Login to the Maestro web interface. See
Logging In (page 3
)
for more information.
2.
The
Status
tab will be selected automatically.
•
The
System
field displays the name of the ZyPerMX4/MX2. This name can be
changed. See the next page for more information.
•
Click the “lightbulb” icon to physically identify the ZyPerMX4/MX2 on the network.
When this icon is clicked, the
Status
LED indicator on the front panel will flash rapidly
for about 10 seconds.
•
The
Video
field displays the video input and output resolution. In the illustration below,
the input is 720p60 and the output is 720p60. Video input and output resolution cannot
be changed. To change the video bitrate see
Adjusting Audio and Video Settings (page
15).
•
The
Audio
field displays the input audio type and the output audio type.
•
The
Model
field displays the name of the model of the ZyPerMX4/MX2.
•
The
Firmware
field displays the current version of firmware.
•
The
Uptime
field displays the time, in days and hours, since the unit was last re
-
booted.
•
The
Temp
field displays the ZyPerMX4/MX2 unit internal temperature
•
The
Enet Average
field displays current average output on the Ethernet port
Note:
This field can be helpful to determine if HLS streaming level has been
reached
•
The
Messages
field receives messages reported by the ZyPerMX4/MX2, during
operation.
22
Basic Operation
