14
Basic Operation
Adjusting Video Settings
The ZyPerMX4/MX2 Video Encoder employs Variable Bit Rate (VBR) encoding when transmitting
IP streams. Specifying the “High Bitrate” , “Low Bitrate” and “Low Resolution” for video will define
the limits of IP stream transmission, without overloading the network bandwidth.
1.
Login to the Maestro web interface. See
Logging In (page 3
)
for more information.
2.
Click the
IP Streaming
tab.
3.
For UDP and RTP streams the High Bitrate setting is used. Note that the Low Bitrate setting
and Low Resolution are disabled in these modes. Click the
High Bitrate
drop-down list to
select a bitrate from 1-10 Mb/sec.
