5
Operating Instruction
4.
Panel Descriptions
Front Panel
①
LCD: Showing HDBaseT switch informations
②
Function button: Up, Down, Left, Right
③
Function button: Menu, Enter
Rear Panel
1
RS232:
RS232 pass through/RS232 for PC tool control;
Ethernet:
IP/Web control;
FW:
micro usb port for firmware update;
IR Ext:
IR extender for control HDBaset switch
2
PC:
Audio in for VGA input only;
HDMI:
Analog PCM2.0 audio embedded
③
Audio SPDIF out(Dolby, DTS, Max 5.1CH)
④
Analog PCM2.0 audio out
⑤
IR-in/IR Out for remote controlling
⑥
DC 24V/1A power supply
⑦
MIC in:for 48V microphone/MIC device(MIC mode,support HDMI/Type C/VGA)
⑧
MIC switch:
Left switch for 48v microphone mode;
Middle switch for MIC mode; Right switch for line mode(Analog PCM2.0 audio embedded)
⑨
Video input: TypeC-1:
Type C in;
PC-2:
VGA in;
HDMI in:
HDMI-3/HDMI-4
⑩
Video output: HDMI:
HDMI out;
HDBT/POC:
HDBT out (connect HDBaset receiver/other HDBaset
products/Cascade)
Note:When you need to use MIC in/Analog audio embedded function,please set the audio input mode for
“Analog” by panel/PC tool/Web GUI first,then switch the MIC switch to choose the audio
format(48v/Mic/Line).
Left Guide button
Short press:left/right choose function option in submenu,in MIC
input VOL/analog out VOL adjustment: left(-) right(+)
Right Guide button
Up Guide button
Short press:up/down choose function option in submenu
Down Guide button
Enter
Confirm button
Short press:enter submenu/back to last status
Menu
Main Menu
Short press:display/direct back to main Menu
