9
1.8
Installation
To setup Avenview DV-SPLITPRO-2B follow these steps for connecting to a device:
1.
Ensure that DVI-SPLITPRO-2B and all other source devices are turned off
2.
Connect a monitor, a projector or other displays that comes with DVI and/or VGA inputs by using 1
male-to-male DVI (VGA) cable to DVI-SPLITPRO-2B DVI output (you can connect 2 displays equipped
with DVI and VGA respectively by a DVI to DVI/VGA breakout cable
3.
Plug in DVI to DVI/VGA breakout cable (DDVY01) to DVI-IN and plug in VGA to component breakout
cable to the VGA connector of the breakout cable.
4.
Connect a monitor, projector, other displays that come with DVI / VGA inputs by using 1 male – male
DVI (VGA) cable to DVI-SPLITPRO-2B DVI output. (you can connect 2 displays equipped with DVI and
VGA respectively by DVI – DVI/VGA breakout cable)
5.
Connect a device equipped with DVI output (such as PC) to the DVI connector of the breakout cable.
6.
Connect a device equipped with component video output (YPbPr such as DVD player or camera) to
the 3-RCA jack.
7.
Connect a device equipped with VGA output (such as laptop) to the VGA connector of
DVI-SPLITPRO-2B.
8.
Connect a device equipped with composite video output to composite input of the DVI-SPLITPRO-2B.
9.
Connect your computer with the DVI-SPLITPRO-2B by a 9-pin RS-232 cable and then install the
software.
10.
Plug in power adapter cable into 5V DC power jack.
11.
Switch on all devices connected and then switch on the video processor and then press “menu” to
display OSD menu.
12.
Press down arrow key dropping down sub-menu to select the first channel (Main Channel)
video/graphic source.
13.
Once the Main Channel has a video selected, press “exit” key to exit the sub-menu, and then move
right to the next item of OSD menu, which allows you to select the second channel (Sub Channel).
14.
For detailed IR remote control operation, please refer to the On Screen Display menu and IR Remote
Control section.
Summary of Contents for DVI-SPLITPRO-2B
Page 5: ...5 ...
