26
Operating Instruction
Demo
7.8
Config
Config can set network, RS232, LCD, OSD, MENU, user EDID, system.
Gray sections cannot be selected, a higher level is required to enable the function. The level are
read-only and read-write.
1) Network
Network can set DHCP, IP, Mask, Gateway, Port and Mac. The Mac address cannot be changed. The
default IP address is 192.168.1.200
DHCP operation:
①
Select “Config” in the main menu and press “ENTER”
②
Press “UP” or “DOWN” to select “ network ”
③
Click “ENTER” to enter the next sub-menu
Summary of Contents for 20112738
