DirekTronik 20112738, Operation Manual

Page: 17 / 55

17
Operating Instruction
Remarks: A layer can select only one output, cannot select it repeatedly, otherwise it does not take
effect.
10 ） Wall
Wall is used to set the coordinate position of the TV. By default, it is in accordance with the matrix
silkscreen making sequence. Set the parameter of CoordX, Width, Height after determining
the actual position of the TV according to the OSD on the TV. The coordinate position of TV in Video
Wall can be changed by using Coord.
Width and Height indicate the number of video wall tiling.
Operation:
①
Select “Output” in the main menu and press “ENTER”
②
Press “UP” or “DOWN” to select “ Output 1~4, all cannot be selected”
③
Click “ENTER” to enter the next sub-menu
④
Press “UP” or “DOWN” to select “Video”
⑤
Press “UP” or “DOWN” to select “Wall”
⑥
Click “ENTER” to enter the next sub-menu
⑦
Press “UP” or “DOWN” to select the coordinate of CoordX or CoordY. The default coordinate for
2x2 video wall:
Out1(X:0, Y:0)
Out2(X:1, Y:0)
Out3(X:0, Y:1)
Out4(X:1, Y:1)
⑧
Set the number of horizontal and vertical splices. Set the number of horizontal and vertical of the
first output, the rest outputs will automatically generate a video wall according to the coordinate. For
example:
The default sequence of video wall of output 1 and output 2 is reversed.
Set the coordinate of output 2 to X0Y0, horizontal 2 and vertical1.
Set the coordinate of output 1 to X1Y0, horizontal auto, vertical auto.
Set the coordinate of output 3 to X0Y1, horizontal auto, vertical auto.
Set the coordinate of output 4 to X1Y1, horizontal auto, vertical auto.