15
Smart Stylus
The Smart Stylus comes with 2 types of tips, soft and hard. They can be
removed and replaced by using the included Tip Replacement
Tool as follows:
WARNING: Choking Hazard
This device may contain small parts which may be a choking hazard to children
under 3. Keep small parts away from children.
NOTE: One of the tips is installed in the Smart Stylus.
6.2 REPLACING THE TIP
1. Smart Stylus
2. AAAA Battery
3. Soft Tips
4. Hard Tips
5. Tip Replacement Tool
6.3 PACKAGE CONTENTS
1. With the Tip Replacement Tool in one hand, and the stylus in another
bring the Tool over the tip of the stylus.
2. Pinch the tool closed around the Tip, and slowly pull the Tip out of the
body of the stylus.
3. To place a new tip, use the Tip Replacement Tool to remove a tip from the packaging.
With the pointed end of the Tip pinched in the Tool, slide the new Tip into the stylus
until the neck of the Tip is not visible.
1. Unscrew the top of the stylus by turning it counter-clockwise.
2. Insert one battery, positive (+) side down, into the
battery compartment.
3. Replace the stylus top by screwing back on clockwise.
Voltage: 1.5V
Current: 0.88mA
Power:
1.32mW
Working: 44kHz
Frequency: 18kHz
6.4 INSTALL THE BATTERY
