DirecTV HIRD-B2, User Manual

Page: 74 / 92

HUGHES-BRAND DIRECTV SYSTEM OWNER’S MANUAL
P
AGE
7-14
For the Family List limit to be enforced, the digital satellite receiver must be locked. Locking is
described earlier in this chapter. When the system is “locked” the passcode will be needed to modify
the settings of the channel lists.
TurboTune™
The TURBOTUNE SETUP screen is used to specify the nine channels that will be offered in the
TurboTune pop-up panel that appears over video when is
pressed.
Places to go from the TURBOTUNE
SETUP screen
Done
The Done button will take you back to the SETUP MENU.
Video
When you select Video , the TURBOTUNE screen will clear from
the display and you will return to the channel that was being viewed prior to entering the menus.
Things to do on the TURBOTUNE SETUP screen
Set Channel
Using the , , , and keys, highlight one of the nine channel boxes. You can enter the desired
channel using the number keys on the remote control, or by using the
and . Pressing
while highlighting one of the channel boxes will also initiate a pop-up panel that will allow you to set
the channel using the and keys on the remote control or the receiver’s front panel.
Installation
The INSTALLATION screen provides the utilities that makes the setup and testing of your system
simple and convenient.
Places to go from the INSTALLATION
screen
System Test
The System Test button takes you to the SYSTEM TEST screen.
Sat 1 / Sat 2
(Available only on HIRD-C2 model receivers)
The Sat 1/Sat 2 button allows you to switch back and forth between
the two different LNBs for those HIRD-C2 systems utilizing both
services.
Things to do on the INSTALLATION screen
The quality of the signal that your DIRECTV System is receiving is automatically displayed. In
addition to using this at installation time, you may also want to check it when you are experiencing
loss of signal, momentary video freezing, or similar problems.
The TURBOTUNE setup screen
The INSTALLATION screen