page 27 of 60
EXBOX.AES Manual - Version 2.0
CHAPTER 4: Operation
Blinking LEDs are also used to indicate an error (e.g.
missing sync). Concentrate on the section where one
LED is blinking and the remaining LEDs are glowing
weak.
Menu Control
All functions of the converter can be accessed using
a simple menu. A single push button is used for
navigation and settings.
SET
Push button
Press longer than 2 seconds to enter the
menu mode and to cycle through the menu.
Press short to change a setting.
When the menu mode is active a LED will blink in
one of the sections while the remaining LEDs of this
section are glowing weak.
This indicates:
• a setting can be adjusted in this section
• the blinking LED(s) is the selected option in this
section
After a short period of time the menu mode is exit
automatically.
NOTE
