Before you start
3
© 2011 ... Directions Ltd
1)Inserting the SIM card
a)make sure that the unit is disconnected from the electrical supply
b)make sure that the PIN number is either disabled or set to 0000. This is most easily done using a mobile
phone.
c)insert your SIM as per picture below
3
Connecting the unit
There are two ways to connect the unit
3.1
Cigarette lighter adaptor
Make sure the vehicle is turned off.
Push the cigarette lighter plug in to your vehicle's cigarette lighter socket. If your vehicle has a 12V power supply
(usually found in the boot) use that instead. Please remember that cigarette lighter sockets usually switch off
when the ignition is off cutting the electrical supply to the tracking unit. It can take several minutes to start
receiving GPS signal when ignition is turned back on, so you may loose the start of your journey.
3.2
Connection
We recommend that electrical installation is performed by a qualified auto-electrical engineer.
Electrical installation must be performed carefully after checking the input voltage. All
electric wires must be properly insulated. All unused wires must also be properly insulated
and if no future use is foreseen then they can be cut shorter. Secure the lead and leftover wires
so that they are not loose, but take care not to damage the insulation.
