
Platform: DBALL2
Firmware: CHRYSLER Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Rev.: 20160908
3
4
Turn the key to the OFF
position and remove it
from the ignition barrel.
Press LOCK or UNLOCK on the
factory transmitter
. The LED turns
ON solid green OR orange for 3 seconds
and then turns off.
or
&
&
or
Solid
Solid
Off
Key OUT
O
F
F
START
IG
N
or
Press the Push-to-Start
(PTS) button once more
to turn the ignition OFF.
1X
ENGINE
START
STOP
PUSH
P
A
N
IC
Page 18
You have successfully completed the module programming sequence.
This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode with or without a
Plug & Play (
CHTHD1
or
CHTHD2
) T-Harness (Optional). This solution offers three (3) configuration
options to control your system: 3x OEM Lock Remote Start Activation, RF Kit or SmartStart
(all sold separately).