Directed VW02, Firmware Specific Manual, Page: 8 / 43

8
Directed Digital System VW02
© 2016 Directed. All rights reserved.
Method 3: Key wrap for Regular Key
- Make 4-6 loops and place them as close to the front of key port (OEM Immobilizer Receiver) as possible.
- Test and secure mounted loops before reassembling the vehicle.
- Make 4-6 loops and place them around the front of the plastic body of the vehicle’s coded key as shown above.
* When possible use valet key for key wrap, if blade key is used, battery must be removed.
16 Black
3 Wh
4 White
12 White
4 Red
7 White
2 Wh
2 Bk
6 G
reen
18 White
Manual/Auto. Transmission Type
Prog.
Button
4-6 loops
4-6 loops
4: Yellow/Red : COM Relay 2
3: Brown/Red : NO Relay 2
OEM
Immobilizer
Receiver
*
Method 4: Key wrap for Regular Key - Alternate
Blue
Brown
Immobilizer ECU
16 Black
3 Wh
4 White
12 White
4 Red
7 White
2 Wh
2 Bk
6 G
reen
18 White
Manual/Auto. Transmission Type
Prog.
Button
4: Yellow/Red : COM Relay 2
3: Brown/Red : NO Relay 2
5: Orange/Red : NC Relay 2
Remove battery
from OEM
Remote Control
OEM
Immobilizer
Receiver
4-6 loops
- Make 4-6 loops and place them around the front of the plastic body of the vehicle's coded key as shown above.
- Test and secure mounted loops before reassembling the vehicle.
- Make connections to the OEM Immobilizer receiver as shown above.
* When possible use valet key for key wrap, if blade key is used, battery must be removed.