P.4
User Guide
Using the Remote Control
Your remote system is equipped with a 5-button multi-channel remote control. The functions of the
transmitter are as follows:
LOCK (LED 1): Locks the
doors.
UNLOCK (LED 2):
Unlocks the doors.
TRUNK (LED 3): Opens
the TRUNK.
START (LED 4): Remote
starts the engine.
SHIFT: This button
serves as a second function
button. In combination with the
other four buttons, this button
allows to assign different
functions to those buttons.
N.B.: Pressing
then the LOCK button will activate the AUX 1 output.
Pressing
then the UNLOCK button will activate the AUX 2 output.
Vehicle Presets (only with remote starter)
Heater
When leaving the vehicle it is recommended to preset the accessory controls in preparation for the
next remote start. Settings for the blower motor (fan), front and rear, should not be left on HIGH. It
is recommended to leave the settings on LOW or MEDIUM instead.
Windshield Wipers, Radio & Headlights
Certain vehicles require the radio and / or windshield wipers and / or headlights circuits to become
energized while running under remote start. When leaving the vehicle you must ensure that the
windshield wipers and headlights switches are OFF. Leaving the headlights switch ON in certain
types of vehicles could cause them to remain ON even after remote starter shutdown, resulting in a
dead battery.
