5
403.VW10 2.00 2008 Volkswagen GTI
©2022 VOXX•DEI LLC. All rights reserved.
Pre-installation and application warnings
START
HERE
This section highlights important information for this specific firmware and will assist in pricing accordingly, as
well as bringing awareness to any operational or vehicle limitations.
Compatibilities and Requirements
T-Harness
compatible
Keys required for
programming
1
Keys required
for operation
1
Vehicle Takeover
Refer to the
Quick Reference Guide
section for more details.
Firmware notes
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.
Refer to the "Vehicle connections" following the installation diagram.
Footnotes
[1] Hood pin:
The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory
hood pin, or if not supported in data.
[2] Tach wire:
Optional connection required on some remote starters, which do not support a tach signal in D2D.
[3] Key Wrap:
Refer to "Immobilizer interface with OEM immobilizer receiver" section for instructions.