5
©
1999 Directed Electronics, Inc.
Using Your System
You can turn on, or arm, the system by pressing
on your trans-
mitter for one second. When the system arms, you will hear a short
siren sound, or chirp. The system is now protecting your vehicle.
When armed, your vehicle is protected in the following ways:
■
Light impacts will trigger the Warn Away
™
signal. When trig-
gered, the siren will chirp for a few seconds.
■
Heavy impacts will trigger the system. The trigger sequence
is 30 seconds of constant siren.
■
The current sensor monitors the electrical system and can
detect an interior light if a door is opened. If the current sen-
sor is being used to detect door entry, the domelight in the
vehicle must be working and left in the “Door” position. If
the domelight does not illuminate when a door is opened, the
current sensor cannot detect the entry.
To turn off, or disarm the system, press
again. You will hear
two chirps, and the system will disarm. If the siren chirps four
times when disarming, the system was triggered in your absence.
This is called Tamper Alert.
Disarming
Arming
Summary of Contents for WASP 718W
