45
© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
QUICK REFERENCE GUIDE
Arming
■
To arm, press
. When the system arms, you will hear a short chirp, and
the parking lights will flash once.
Arming while driving
■
To arm the system while driving, press
on your 2-way remote while the
vehicle is running. The system will chirp once and then once more to indi-
cate that the ignition is on.
Disarming
■
To disarm, press
. You will hear two chirps, and the parking lights will
flash twice.
High security disarm
■
For high security disarm, press
on your 2-way remote and the siren will
stop sounding. To completely disarm the security system, press again and the
system will chirp 4 or 5 times (reporting the trigger).
Disarming without a 2-way remote
■
Turn on the ignition. Press the Valet
®
button within 15 seconds. The system
should now disarm. If it does not, you may have waited too long, so turn the
ignition off and on and try again.
Silent Mode
™
■
Pressing
briefly before arming or disarming will eliminate the confirma-
tion chirp(s) for that one operation only.
Panic Mode
■
Press
for 2 seconds, and you will enter Panic Mode. The siren will sound
and the parking lights will flash for 30 seconds. To stop Panic Mode at any
time, press
on the 2-way remote again.
To remote start the vehicle
■
Press
and
simultaneously. The parking lights will turn on (if
connected) and the vehicle will start and run for the programmed period of
time.
To disable the remote start system
■
To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Valet
®
button_________________________________
Number of Valet
®
button pulses for disarming_______________
Cut along dotted line and f
old f
o
r a quick and eas
y
r
efer
ence to k
eep in y
our pur
se or w
allet.
✂
✂
