35
©
2000 Directed Electronics, Inc.
QUICK REFERENCE GUIDE:
Arming
■
To arm, press
. When the system arms, you will hear a short chirp,
and the parking lights will flash once.
Arming while driving
■
To arm the system while driving, press
on your transmitter for 1 sec-
ond while the vehicle is running. The system will chirp once and then
once more to indicate that the ignition is on.
Disarming
■
To disarm, press
. You will hear two chirps, and the parking lights
will flash twice.
High security disarm
■
For high security disarm, press
on your transmitter and the siren will
stop sounding. To completely disarm the security system, press
again and the system will chirp 4 or 5 times (reporting the trigger).
Disarming without a transmitter
■
Turn on the ignition. Press the Valet
®
switch within 15 seconds. The sys-
tem should now disarm. If it does not, you may have waited too long,
so turn the ignition off and on and try again.
Silent Mode
™
■
Pressing
briefly before arming or disarming will eliminate the con-
firmation chirp(s) for that one operation only.
Panic Mode
■
Press
for 1 second, and you will enter Panic Mode. The siren will
sound and the parking lights will flash for 30 seconds. To stop Panic
Mode at any time, press
,
, or
on the transmitter.
To remote start the vehicle
■
Press
and
simultaneously. The parking lights will turn on (if con-
nected) and the vehicle will start and run for the programmed period of
time.
To disable the remote start system
■
To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Valet
®
switch_________________________________
Number of Valet
®
switch pulses for disarming_______________
Cut along dotted line and f
old f
o
r a quick and eas
y r
efer
ence to k
eep in y
our pur
se or w
allet.
✂
✂
