9
© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
Command Page
When a command (arm/disarm, remote start, or auxiliary
channel) from the remote control is sent and received, the system
will send a command page back to confirm receipt.
Alarm Page
If the ignition is turned on while locked, the system will actuate
the panic feature and an Alarm Page will be sent to the remote
control. When the remote receives this Alarm Page, the remote
control will generate 4 beeps 5 times and the Red LED will illu-
minate for 3-seconds. This will repeat every 100 seconds to alert
the user that the security feature was triggered and will continue
until the alarm page is cleared.
Page Recognition
To clear a page alert/notification, quickly press any button on the
remote control. This can be performed at any time during or after
the page notification has occurred.
The remote control will not send a command to the system at
this time; it will only clear future repeats of the page notification.
The next time a button is pressed on the remote control it will
send a command to the system.
out of range notification
If a command is issued from the remote, but the remote is
beyond the range of the vehicle to receive the command, the
remote responds with 2 sets of 3 quick beeps and the Green LED
will flash 6-times.
«
