33
© 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
QUICK REFERENCE GUIDE
To lock/arm using your 2-way remote
■
To arm the system press
for one second. The doors will lock (if con-
nected). The in-vehicle status LED will begin to flash. The Failsafe
®
Starter Kill will prevent the vehicle’s starter from cranking if it has been
installed. The vehicle’s horn (if connected) will honk and the parking
lights will flash once to confirm arming of the system.
To unlock/disarm using your 2-way remote
■
To disarm the system press
for one second. The doors will unlock (if
connected). The Failsafe
®
Starter Kill will be deactivated and the vehicle’s
horn (if connected) will honk twice and the parking lights will flash twice.
Disabling the Failsafe
®
Starter Kill without a 2-way remote
■
Turn on the ignition. Press and release the Valet
®
switch once within 10
seconds. The in-vehicle status LED will stop flashing and the vehicle
should start. Be sure to check with the installer for the location of the
Valet
®
switch.
To remote start the vehicle
■
Press
twice. The parking lights will turn on (if connected) and the
vehicle will start and run for the programmed amount of time.
To enter or exit Valet
®
Mode
■
Turn the ignition to the "ON" position. Turn the ignition back off. Press
and release the Valet
®
switch once within 10 seconds. The in-vehicle
status LED will light steadily if you have entered Valet
®
Mode. To exit Va-
let
®
Mode, repeat the steps above. The in-vehicle status LED will turn off
when exiting Valet
®
Mode.
To activate Panic Mode
■
Press and hold
for 1.5 seconds.
To disable the remote start system
■
To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Shutdown Switch______________________________
Cut along dotted line and f
old f
o
r a quick and eas
y
r
efer
ence to k
eep in y
our pur
se or w
allet.
✂
✂
