Directed Electronics 650 ESP, Owner'S Manual

Page: 24 / 40

20
©
1999 Directed Electronics, Inc.
Programming Options
Programming options control what your system does during nor-
mal operation, and require few or no additional parts. However,
some may require additional installation labor.
The following is a list of the program settings, with the factory
settings in Bold :
■
Active arming (only with the transmitter) or passive arming
(automatic arming 30-seconds after the last door has been
closed).
■
Arming/disarming confirmation siren chirps on or off.
■
The ignition controlled door lock feature on or off: With this
feature on, the doors will lock three seconds after the igni-
tion is turned on, and unlock when the ignition is turned off.
The system can also be programmed to prevent the doors
from locking when the ignition is turned on with any door
open. If your installer is programming the security system
with the DEI Bitwriter or a personal computer and the
TechSoft Programmer, ignition lock and unlock are indepen-
dent features and can be programmed separately.
■
Passive door locking (with passive arming) or active door
locking (only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.